Safety first: Unplug before pulling the bucket, washing a filter or inspecting drain hardware. Keep water off electrical outlets. Refrigerant-sealed refrigeration work and internal mains/PCB repairs require authorized service.
Model and version covered
Midea MAD50C1AWS 50-pint EasyDry, the no-built-in-pump version. Do not apply drain-pump hose, Eb or pump-flashing procedures intended for MAD50P1AWS.
Version check: MAD50C1AWS is the non-pump variant. Do not use the drain-pump repair instructions for pump-equipped models.
DIAGNOSE THE CAUSE · APPLY THE FIX · CONFIRM THE RESULT
Find the cause and fix it
Jump to your symptom: 01 · P2 with bucket actually filled02 · P2 with empty bucket03 · P2 persists with correctly seated bucket and free float
01
P2 with bucket actually filled
HOW TO CHECK & CORRECT THIS CAUSE
- Turn unit off, pull out the bucket without spilling, empty it and push it back squarely until seated.
- Never bypass the overflow cutoff.
How to tell it is fixed: P2 clears and collection resumes.
02
P2 with empty bucket
HOW TO CHECK & CORRECT THIS CAUSE
- Remove and reseat bucket.
- Inspect accessible float movement for a stuck-up float, remove debris and restore its free motion without defeating switch.
How to tell it is fixed: P2 clears with float lowered; unit stops appropriately when filled.
03
P2 persists with correctly seated bucket and free float
HOW TO CHECK & CORRECT THIS CAUSE
- Bucket-presence/level sensing needs model-specific service.
- Do not substitute pump-unit P2 steps because MAD50C1AWS is the non-pump version.
How to tell it is fixed: Sensing responds reliably to both installed empty and full bucket states.
Source and model restrictions
Technical baseline: Manufacturer guide or model manual ↗