Safety first: Remove the robot from the pool using the approved retrieval method. Power it off and dry the charge port before attaching the OEM charger. Never open its sealed battery case or test submerged motors on a dry surface.
Model and version covered
Original Aiper Scuba S1. Check product-year and full label: Scuba S1 2025/2026, S1 Pro and other Aiper models may have different app, LED and button features.
DIAGNOSE THE CAUSE · APPLY THE FIX · CONFIRM THE RESULT
Find the cause and fix it
Jump to your symptom: 01 · Robot moves but leaves large debris behind02 · Robot misses wall/step regions03 · Tracks work but no suction/waterflow
01
Robot moves but leaves large debris behind
HOW TO CHECK & CORRECT THIS CAUSE
- Take it out of water, remove and rinse debris basket/filter, ensure filter seats and its mesh is intact.
- Clear intake and cleaning brush and run correct pool floor mode.
How to tell it is fixed: Test area is visibly cleaned with debris captured in filter.
02
Robot misses wall/step regions
HOW TO CHECK & CORRECT THIS CAUSE
- Choose a mode intended for that surface per installed S1 revision.
- Ensure full charge and appropriate pool shape/slope rather than trying to force wall climb on unsupported finish.
How to tell it is fixed: Coverage improves in model-rated areas.
03
Tracks work but no suction/waterflow
HOW TO CHECK & CORRECT THIS CAUSE
- Check blocked inlet/outlet and cleaning turbine without opening sealed electronics.
- Failed pump/fan assembly requires matched warranty repair.
How to tell it is fixed: Water circulation and debris pickup return.
Source and model restrictions
Technical baseline: Manufacturer guide or model manual ↗