Safety first: Switch the robot off and unplug the dock before clearing brushes, ducts or contacts. Keep liquids out of the dock and LDS. Use only the specified base and battery components.
Confirm exact model and variant
Use only Dreame D10 Plus Gen 2 (RLD32GD) and its matching auto-empty base (RCDD0202). Original D10 Plus/D10s Plus instructions or app features may differ by version.
DIAGNOSE THE CAUSE · APPLY THE FIX · CONFIRM THE RESULT
Find the cause and fix it
Jump to your symptom: 01 · Suction has fallen as dust bin fills02 · Only rug cleaning is weak03 · High suction remains weak with clean sealed pathway
01
Suction has fallen as dust bin fills
HOW TO CHECK & CORRECT THIS CAUSE
- Empty robot dust box, clean main roller of hair and remove clog at brush inlet, clean/replace dust filter exactly as its washable status in this model's manual allows and dry before fitting.
How to tell it is fixed: Similar floor sample is picked up cleanly.
02
Only rug cleaning is weak
HOW TO CHECK & CORRECT THIS CAUSE
- Set intended suction level in Dreame app, verify carpet boost if supported and remove hair wound around brush end caps.
How to tell it is fixed: Robot picks up normal dry debris on rug without brush dragging.
03
High suction remains weak with clean sealed pathway
HOW TO CHECK & CORRECT THIS CAUSE
- Inspect intake gaskets/fan for leak or failure and obtain matched vacuum fan service, not unapproved motor disassembly.
How to tell it is fixed: Consistent suction without abnormal fan noise after repair.
Model source and method basis
Reference: Read corresponding manufacturer/manual source ↗
The fault definitions, named controls and any published specifications follow the linked documentation. Ordered isolation tests are conservative explanatory procedures, not a claim that all checks are verbatim factory service instructions. If the stated manual does not establish a measurement or part compatibility, this guide deliberately does not invent it.